Home > Technical Support > Short-range Distance Sensor TFmini > Q: When the TFmini is used to set the altitude of the drone, the drone has hit the ground. But the landing gear of the aircraft has a buffer, the height is not very high, and there is no impact on the LiDAR. Why is the LiDAR unable to use suddenly?

Q: When the TFmini is used to set the altitude of the drone, the drone has hit the ground. But the landing gear of the aircraft has a buffer, the height is not very high, and there is no impact on the LiDAR. Why is the LiDAR unable to use suddenly?

A: It is possible that the impact of the LiDAR is greater than the vibration that it can undertake, resulting in LiDAR damage. The product is vibration tested and has a corresponding vibration test report. This phenomenon does not occur during normal vibration.

Prev:No Data

Next:Q: After use, when the LiDAR cable is unplugged, it is not easy to pull out and the LiDAR terminal is dropped easily.


Support Email

4008809610