Home > Technical Support > Short-range Distance Sensor TFmini > Q: If LiDAR performs other operations in a short time (below 30ms) after sending a configuration command to it, will this affect the LiDAR?

Q: If LiDAR performs other operations in a short time (below 30ms) after sending a configuration command to it, will this affect the LiDAR?

A: Performing other operations within a short time (below 30ms) after sending a configuration command may damage the LiDAR program. It is recommended to wait at least 500ms from power-on to configuration TFmini.

Prev:No Data

Next:Q: After use, when the LiDAR cable is unplugged, it is not easy to pull out and the LiDAR terminal is dropped easily.


Support Email

4008809610